WIP: Skaven and Scouts

Okay, definitely too long since last update, and not much to show for it.. But here goes anyway – I’ve built a couple more 40k Skaven, and also begun working on a SM Scout Squad.

First the Skaven. I’ve built a sneaky sniper and another riflerat, though with a small conversion this time. To reflect the idea that these guys are using any old hardware that can be mustered, I wanted some autoguns in their hands. I converted one from a Cadian lasgun by changing the magazine to one from a bolter, and took a barrel from an old Catachan lasgun.

The sniper was a bit more involved conversion. I wanted to use a Skitarii rifle, and with it would come the hands and arms as well. I did want to retain the Cadian shoulder pads though, so I needed to do some cutting. It didn’t go quite as nicely as I’d envisioned, and before greenstuffing I was a bit unsure if I had botched the arms. After the sculpting I reckon he looks good, no need for a redo. Which is good as all the Skitarii rifles are unique, so I couldn’t get the same pose again.

I originally thought that the sniper wouldn’t be carrying a lot of equipment on him, “traveling light” instead. But he seemed to need something on his back to balance the rifle on the front. Happily I recently received my small order from Kromlech (more on this later), and they had put in two freebie backpacks as well. I felt the other one was perfect for the sniper, and it even fit without any cutting.

Then on to the Scouts. I’ve actually had the Scout kit and the Scion heads to go with it for a long time, but before I got to building them, I saw West_minis’ brilliant Crimson Fists Scouts, that used Scion backpacks as well as the heads. Naturally I had to put the project on hold until I could get my hands on the rest of the Scions kit. This happened last week, and I set to work. The shotgunners were pretty straightforward, requiring only cutting down their back humps and a bit of greenstuff on their necks. Though I got to say that the arms were a right pain to get aligned. Still not sure if they’re how they’re supposed to.. I’m pretty sure I won’t be building another Scout squad after this (other than the Sniper squad I’ve got in my pile of shame..).

The sergeant on the other hand required more cutting and fixing, as I once again wanted to retain the original shoulderpads. With a bit of creative cutting and some putty, the Scion bolt pistol and power fist arms fit the Scout model pretty great! He’s also got a regular Space Marine head from the mkIV kit. It took some effort to attach, as I didn’t have a correct drill bit, but I got there in the end. I also cut off the service stud from his forehead.

I’ll have to get on painting these models as soon as possible, as I’ve got to get something done for Azazel’s August challenge. I’ve got three weeks though, minus the weekends, so I should be okay. Even if I don’t get all of them painted, I should be able to do at least a couple.

Advertisements

Revelators Captain, Collection So Far

Oh yes, my marine Captain is finally finished! With that, I’ve finished what roughly equates to a Start Collecting! box plus some extras, giving me a game legal army (at least what was legal back in 4th..). I’m not planning on playing any time soon, of course, but that’s neither here or there..

This model was converted way back in November last year, and as those who were in the hobby in the 3rd ed. era might recognize, he’s based on the old metal Captain model that came in the Command Squad box. I planned the kitbash/conversion for a long time, but basically I noticed that you could get the plastic Captain to look pretty close to the old metal one just by finding an appropriate head. I think the one I used is from some Primaris kit. I also did a small alteration to the armor: I added the collar and the studs in it to get a closer resemblance to the original. There are some differences, of course, like the backpack which I like more than the basic design.

As this was a special model, I wanted to do something different with the painting. I’d seen Ben Komets’ tutorial on a 2 hour “tabletop” Ultramarine, and inspired by it I thought I’d try to do some panel modulation on the armor. Nothing like proper NMM, but maybe something shinier than the regular grunts. I also wanted to do something with the cloak, and decided to try freehanding the chapter badge in there. Needless to say, painting this guy took quite a bit more than 2 hours to finish, but I’m pretty pleased with myself anyway. Painting the armor was actually quite fun, and while I suspect it took longer than my previous marines, it didn’t feel like it. One cool thing is that I didn’t use any washes on the gray armor!

I got the freehand on the cloak done without too much issues. I did have to repaint the small triangular rays, as I initially their position was off, but that was pretty much it. White design on black had me worried in the beginning, but starting with Celestra Grey and working up from there seemed to work well. The face was fun to paint once again, and I tried some new things there as well. I tried doing the “eye liner” to define the eyes better, and used dark brown and off-white instead of black and white. I think the result is nice, although in the close-up the eyes look maybe a bit too wide. Good enough, I say!

Above you can see the Captain with his Veteran Sergeant (write-up pending), another plastic tribute to the 3rd ed. Command Squad box. And as I mentioned in a comment on a previous post, I took a photo of my fledgling Space Marine army. They’re starting to look respectable! In addition to the Captain, there’s a Tactical Squad, an Ironclad, a Devastator Squad, the Veteran Sergeant mentioned above and the Sergeant from Battle for Macragge starter set (again, write-up pending).

And last but not least, another square claimed in the bingo card! The Captain was a new version of one of my old character models (see the old version in the post about my Ultramarine army). With his power armor he also counts for Azazel’s Mechanismo May challenge.

Revelators Ironclad Dreadnought

It has been a bit too long since my last update, but I’ve finally got something new to show! I’ve finished an Ironclad Dreadnought for my Revelators. This is my main entry for Azazel’s Armoured April challenge.

I’ve loved the Space Marine Dreadnought ever since I first saw it when getting into the hobby back in 3rd edition of WH40k. While it doesn’t look very functional with those stubby legs, there is something special about the boxy hull and the small vision slit. In the 3rd edition days there was only the standard Dread, I think the Ironclad and the Venerable variants came slightly after my miniature hobby went on a long break. And of course, there’s now countless other Dreads as well, like the Primaris Redemptor and all those weird ones from Forgeworld. I’m not too hot on them myself, but luckily the old Castaferrums are still available. I’ve still got an unbuilt Venerable kit and I’m looking to get the classic Dread into my collection as well!

This guy took quite a bit longer to paint than I though it would, it’s a fairly simple model after all. But I did lose two weekends to travelling, and a couple of days to a flu (insert a Nurgle joke here). And layering the armor took ages! Well, it’s ready now and that’s all that matters. Overall this was a fun project. I tried a couple of new things and learned some important lessons.

This was my first vehicle in my current Space Marine collection, and I thought I’d have to do some battle damage so it wouldn’t look too boring. I’d have to keep it from going too extreme though, as my marines have no weathering. I think I overdid it a bit, again, but I’m happy with most of it. Another new trick I tried was masking: I did the soot on the flamers/exhaust pipes after finishing the (clean) armor, and not wanting to mess up that I tried some Faskolor tape that I have left over from my RC hobby. Worked out nicely!

What did I learn? One important thing: MicroSol softens acrylic paint too! So don’t be lazy like me, and apply gloss varnish before laying down the decals and chemicals! Another thing that I’ll be paying attention to in the future is how to handle sub-assemblies, as now I got some minor metal flakes on the arms by holding them with my fingers. Not super apparent, but annoying.

Modelling-wise, this Ironclad is pretty much as barebones as it gets. The only accessory I put on him was the smoke launcher. I did consider purity seals and other decorations, but I kind of wanted to keep him looking very utilitarian, a brawler without any bells or whistles. The one minor conversion I did was cutting out his “toes” and putting the feet on backwards. If I would’ve thought about it a little sooner, magnetizing some bits could’ve been nice, but I’ll just leave that for some other project. And in hindsight, I probably should have improved the base a bit with some fine sand and such. Well, at least I’ve got an example of the OG (at least to me) pre-molded scenic base in my collection!

I wasn’t too happy with the faceplates in this kit, but as I don’t have any better ones currently, I just attached one with a tiny blob of super glue so that it can be switched later. I think I’ve warmed up to it now though, so it’ll probably stay. In my quest to name all my Revelators units after cool video games, I dubbed the Dread ‘Ruiner’, though part of the name/callsign is sadly obscured by the purity seal.

Above you can see him duking it out with my other Dread, done for last Orktober. Is the washing machine a tiny bit shorter than the trash can? More on the Ork Dreadnought later. And, as with most of my models lately, I was able to claim a square in the hobby bingo: “paint a vehicle”.

Revelators Devastator Squad

Finally! New finished models! Time for some more Space Marines from my home-brew chapter Revelators. A theme for Azazel‘s March hobby challenge was squads, and I decided that it was time to paint up my Devastators armed with heavy bolters.

These guys had been sitting in my project queue for more than a year. The basic models were built, but needed some accessories and basing. Additionally, the sarge’s arms were in a really weird pose, raised up and almost covering his face (what was I thinking..). I cut the arms off and repositioned them, and it made a huge difference! I really love the pose now!

Modelling-wise, my favorite thing about these marines are the accessories that I added. Up until now I’ve pretty much avoided adding anything but grenades and purity seals to the models, as the pouches and holsters rarely seemed to fit, and/or seemed way too large. The trick seems to be that you have to cut one of the pouches off (so that you get one large pouch or double small pouch), and then the bits fit pretty nicely.

Of course, as you’ve probably noticed if you’re familiar with SM kits, I’ve also changed the standard armor bits with this squad. I thought that the heavy mk3 armor would fit the Devastators well, but as I don’t really like the mk3 helmets or backpacks, I decided to go with mk7 bits for those. My “lore reasoning” being that the more modern equipment would provide better optics and more efficient power.

Not much to say about the painting, it was a bit of a slog, the gold shoulder pad trims especially took a little back-and-forth (Auric Armour Gold is terrible..). My Raphael brush that I had been using for general purpose painting lost its tip (or got so bad that I didn’t tolerate it anymore) while I was painting the lettering on the banner, so I pulled a fresh one for the face. Oh my word, I think I never had this good tip on the last brush! Well, I probably ruined it right the first time I used it.. But this was the first time I could paint the eyes without having to clean up the eyelids afterwards! Makes me kind of want to try and do eyes with dark outlines, like the big boys do! Just got to keep this one in good shape..

And to top the post off, I’ll get to mark another square in the bingo card! These were proper neglegted models.

Where It All Started: Ultramarines

Time for even more old minis, and this time we’re going right to the beginning! Last week was winter/skiing holiday and I got to spend some time in our summer cottage (I know, I know.. It’s Finland!). I’ve got all my old minis from my (pre-)teenage years there and I thought that I’d document them. Beware, less-than-stellar paintjobs, a mis-mash of different edition models and Goblin Green bases inbound!

I started the hobby, like many others, with Space Marines. I also had this strange notion that I had to replicate the box art, both in painting and even in modelling (ughh..). The first box I bought was a Space Marine (or WH40k?) paint set, which came with nine pots of paint, a brush and five 2nd ed. monopose marines. Below, my first ever GW miniature!

Okay, so I’m pretty sure he’s not my first one.. They’re monopose! Actually, I think he was originally painted by my brother, who also bought the same box, but didn’t care for the hobby in the end. I got his models, touched them up a bit and formed a full Tactical Squad. But, this one model is the only one I have that has the original yellow shoulder pad trim, so for all intents and purposes, he’s my first one!

Somewhere along the line I ended up switching from the 2nd company yellow to the 3rd company red. It was to do with the box arts, what else? Originally I had no idea what the trim colors meant, I just followed the ‘Eavy Metal examples, and so my Command Squad (below) was always in 3rd company colors, while the rest of the models were in 2nd company. When I eventually got the new Command Squad, which had the new 2nd company color scheme on the box, I decided to switch everything to 3rd company as they had the cooler banner!

Speaking about banners, they were all drawn on paper with a pencil and painted with the same undiluted GW paints that I used on the minis as well. I didn’t actually have pink paint, so the Tyranid head on the Standard Bearer’s flag is colored with a pencil. As the standard in the new Command Squad was plastic, so I couldn’t use pencils, I had to man up and mix my own pink paint!

As you can tell, my force was pretty HQ-heavy. Part of it was that they were cool models, and maybe a bigger part was that I bought whatever my meager pocket money could afford and what was available locally. Blisters were cheaper than full boxes!

The final two pictures are of the new Command Squad, which as I recall was the final box of marines that I painted before quitting the hobby (or going on a long hiatus, as it turned out). The reason that they’re not in the same photo is that I’ve been keeping the sarge and the banner bearer with me all this time. The squad as a whole shows the height of my teenage marine painting skills, and provides a reference for comparing where I’m now with my painting.

I do have to say that while these are not great paintjobs by any means, they’re not bad either. Especially the last minis that I did would be on a very respectable tabletop standard if you’d only throw a wash on them. I’ve always tried to be tidy with my painting and keep the colors in-between the lines, which does take quite a lot of time but I reckon is worth it in the end.

From the Archives: Revelators Tactical Squad

Today I thought I’d show a Tactical Squad of my homebrew Space Marine chapter, Revelators.

The squad was a slow project, as it took roughly a year to get from start to finish. I started it right after the Cultists from last post (well, I did some color tests in-between, more on those later), finished the first five around May-June of 2018, and then finally the last five in September, just in time to take part for the first time in Azazel’s monthly hobby challenge.

I guess the biggest reason for not getting them done sooner was the chapter symbol, that I only decided on last spring (another reason was Shadespire..). I had settled on the name Revelators (color scheme was a modification of the Revilers chapters, name would be close too), and wanted the icon to be based on light, so I had ideas of flames, torches or sun/halo emblems. However, if I chose a custom design, I’d have to freehand it many, many times and I just wasn’t/am not ready for that. I found that the Heresy-era Thousand Sons emblem looked suitable and was cheaply available from eBay, so I went with those.

As I mentioned, I did some color tests before starting on the squad. One was an orange marine done just for fun, the other one a proto-Revelator. In the final design I changed the lenses from red to blue (thanks, orange marine!), and went with a different shade of gold. I ended up spray varnishing these models, like the Cultists, with the same results. Amusingly, the orange marine’s shoulder pauldrons and power pack exhausts look exactly like orange peel!