Corvus Cabal Shadow Piercer

After finishing the last five Necrons, I still had a couple of free days before work started. I wanted to work on something that I could most likely get done quickly, and picked up the Shadow Piercer. She took me about a week longer to paint than I’d have hoped, but she’s finished now.

Painting the figure was pretty fun, and largely similar affair to the last two Cabal models. In some ways I still think that the first Cabalist I painted is still the best one, probably due to overall contrast, but I tried to push it here with the clothes and think that the result is pretty good. I’ve improved in painting skin, ironically by reducing contrast there! I even added some light blue to the eye lids and lower parts of the severed head, which I think was successful. Some pink tones could work well to make the (Cabalist’s) skin more interesting, but I have wanted to paint this warband mainly in cold tones. Who knows, maybe I’ll change my mind in the future and come back to experiment with these models…

Speaking of keeping the color palette in the blues and blacks, I made a little concession with the Blood for the Blood God. I pretty much had to add it to the trophy head and its sculpted blood drips. I debated on whether to add it to the sword as well, but it seemed appropriate in the end. The additional spot color also works to differentiate the Shadow Piercer as the leader of the Cabal.

In addition to the blood, the other new feature on this model compared to the two previous ones is her armor. This presented me with another dilemma – in the studio version gold is used to separate elements. I was very close to caving in and painting the armor trims and the beak gold, but I think I got just enough contrast in there to make the model not look boring.

For a minute I was worried that I wouldn’t be able to claim any bingo squares with this model. And then I realized that yes, this model too has been in my to-do pile, and even started for more than a year. That’s my hobby bingo card started for the year 2022!

Corvus Cabal Shrike Talon

My Cabal is getting reinforced with another model, as I’ve finished one of the coolest models of 2019! Here’s the Shrike Talon.

As with the Cabalist, I pretty much followed the ‘Eavy Metal color scheme with this model. One of the challenges with the scheme and with this model in particular is the separation of different black elements. Following the painting guide in the assembly instructions booklet (and looking at the studio models), I highlighted the feathers with blue and the hood with brown tones. I’m not sure if the colors still read as blacks, but I’m happy either way! I guess the biggest difference to the studio scheme is that I left out the painted, diamond-shape eyes from the hood. I get why they’re there in the original – to draw attention to the head, but I never liked them that much aesthetically.

I feel some parts of this model were painted a bit sloppily. As I mentioned in the last posts, I haven’t gotten quite as much painting done as I would’ve wanted lately. I noticed that this translated into less accurate painting. After a day or two I seemed to get back to the swing of things though, and the paint started to go where I wanted it to. Last week I made a conscious effort to get back to painting, and decided that I would at least put paint on my brush (if not the model) every day. Every time I did, I ended up painting for at least an hour! Let’s see how long I can keep this up…

Oh yeah, a small PSA: I’ve treated myself to some new electronics which might affect the photos on this here blog. I got a new Pixel 4a phone with that fancy camera software, which hopefully should lead to WIP shots that have much better color accuracy than before. And from the Black Friday sales I bought a new monitor to replace my previous, 10-year-old one. The important bit is that this new one has an IPS panel which is much better with colors than the TN panel in the old monitor. So, chances are that from now on the photos will be a bit less saturated, as I probably over-saturated everything a bit with the old monitor. Shouldn’t be a dramatic change, but just a heads-up if anyone notices it.

WIP: Nu-Marines, More Cabalites; Magnetized Storage; Molds

I’ve been on build mode again, and let me just get on record and say: I’m as slow with my modeling as I am with painting! I had the whole weekend for hobbying, and managed to build a grand total of three and a half models, plus their bases.. I’ve also been working on a storage solution and some rudimentary mold making.

So first up, the new models! Well, new-ish. I bought the ETB Intercessors triple pack (now OOP, it seems) last spring during the lockdown period and even started working on one of the models (the guy on the left in the pic above). I’m not a huge fan of the bolt rifle design, much preferring the old bolters and pistols. Likewise, the mk7 helmets and backpacks look better than mkX to me. Thankfully they’re all more or less interchangeable with the Primaris kit! So yeah, the first guy got his bolter, a mk7 backpack and a custom mk7 helmet. It might not show well in the photo, but I’ve carved the helmet a bit to join the two eye lenses into a single visor. It’s actually a conversion I first created back in my teenage years, inspired by Doomguy (/Doom Slayer).

The second Intercessor also got some mk7 weapons, but a mk3 helmet and backpack. I don’t really care for those on mini-marines, so I’ve still got plenty of them left after building my Devastator squad. They look great on the Primaris bodies though, especially for the more knightly chapters. This one will be a Black Templar! One additional modification I did was shave his chest (:D) smooth for some extra freehand room. (Cawdor ganger for a size comparison.)

I also built two more Corvus Cabalists, this time the characters in the gang – the Shrike Talon and the Shadow Piercer. I think the Talon is one of the coolest models in the GW’s current lineup, and was built accord to instructions. The Piercer received a tiny conversion: I clipped off the tip of her sword to give it a bit cleaner lines. For both of their bases I added some plasticard tiles to hint at a ruined city. The Shrike Talon’s 40mm base maybe could’ve used some more decoration, but I didn’t want to give the model any more height (with cork board or such), as he already towers over his mates. Maybe I’ll add some discarded weapons or other bits before priming..

Then on to the magnets and storage! A couple of months back I decided that it was time to build a magnetized container to store/transport miniatures in. I bought a plastic tub and a big sheet of 0.7mm steel, which I cut into smaller ones at my workplace. I ended up with six 25x33cm sheets, so plenty for future boxes as well. A good thing, as I switched jobs and don’t have access to a proper quillotine anymore! I attached the steel sheets to the plastic tubs with nuts, bolts and some washers (see here for a closer look). There’s plenty of room for “regular” sized models (9-10cm), and taller boxes are available should I ever get myself an Imperial Knight! These boxes are stackable and the lid locks securely with kind of clips, which are easy to open.

I got a pack of 3x2mm magnets from GreenStuffWorld and attached them to models’ bases with Milliput. I’ve seen people do this with Greenstuff, but Milliput is cheaper and can be used as an adhesive itself. I was able to pry of a magnet attached with Milliput, but I’m hoping they won’t fall of with normal use. If they do, I’ll super glue them.

Of course, one always mixes up too much Milliput (/Greenstuff)! I used the extra to finally try out a Blue Stuff mold I made a couple months back. The molds are not perfect (one’s okay, the other pretty bad) and the casting added further imperfections, but I reckon they’ll be fine for some terrain! I think I’ll try to do the wheel mold(s) one more time, but then I really need to take the (plastic) wheel and get on building my final biker!

Corvus Cabalist

This weekend I took a slight detour from finishing the bikers I showed in the last post, to build and paint a single small model. Here’s my first Warcry model: a Corvus Cabalist.

So on Friday I was browsing the local (/national) wargaming forum’s trading area, and spotted someone selling quite a lot of unopened kits for half price in my city. Apparently he had excitedly bought a bit too much and was selling off things he didn’t see painting in the near future. Probably a wiser man than many of us 😀 Even so, I got in touch with him and a couple of hours later a brand new Corvus Cabal box changed hands. And a few other kits as well, but more on those later..

Having bought new models and the weekend ahead of me, I had the perfect opportunity to finish a hobby bingo square that has so far eluded me: finish a model in 48 hours of acquiring it. Now, this shouldn’t be too hard, as surely we’re all eager to get those new models finished as soon as possible! But for one reason or another, they often go to the cupboard of unfinished models to wait for their turn, and might stay there for quite a while. Now, truth be told, I’ve mainly wanted the Cabal box to own the Shrike Talon and maybe some cool conversion bits, I’m not really interested in playing Warcry. I reckoned that painting one of the standard Cabalists would be good practice for the Talon and should be quick enough to paint even at my slow pace.

I built and based the model on Friday evening. I did a minor conversion too, as I’m not super fond of the kama style weapons they have. I shortened the handle a bit and used the kama’s blade to give the model a knife with a hawksbill style blade, which I like quite a bit more than the original. On Saturday I primed her zenithally using rattle cans, which went a lot smoother than with the Poxwalkers. In addition to that, I washed the model with Nuln Oil and drybrushed it with White Scar, which gave me a really nicely defined and shaded starting point. I also used some Contrast and Base paints to lay initial basecoats on the model. I decided to go with the studio scheme for these, partly because I didn’t have much time to mull it over, partly because the studio scheme fits the Cabal really well. I did leave the bloody throats out, as I think they’re a bit silly..

On Sunday I painted the rest of the model and got it finished with a good hour left before the deadline! I know I could’ve just left her in the “battle ready”, basecoated stage, give her a simple base and call it done, but as I had plenty of time, I wanted to do it properly, and actually practice for the Shrike Talon. So I ended up covering pretty much all of the basecoats by layering and highlighting. It was a very enjoyable process though, so I don’t mind. I used a similar palette as for Mollog, and again finished all colors with highlights of Pallid Wychflesh. I’m particularly happy with the beak (on the mask), I think I got the transitions down pretty well. I also like her eye, which at first at first I was going to leave black, but while I “was in the area” with my paintbrush, I thought I’d paint just a small dot of white in the corner to give an impression of a pupil. Worked well!

White there are a couple of things that could be improved and I’ll probably change with the next Cabalist, I’m very happy with the model and feel that I can more or less paint the Shrike Talon and any other Cabalists with the same techniques and paints. So yeah, one more square down, which takes me quite close to getting my first completed row. Unfortunately, I won’t be making a 2’x2′ table in the foreseeable future, due to limited storage space and no real use either.. So it’s back to working on the bikes and the “vehicle” square!